During the hot summer days, the ice maker is our most effective friend in the kitchen. But what if your ice maker abruptly stops making any ice, what are you to do? Properly, my friend, you are in luck, because this post will enable you know the reason why and what are the necessary steps to perform in order to resolve the challenge.
So, why is your ice maker not making any ice?
1. Energy connection
Before something else, check whether or not your machine is connected to the energy outlet, if it is, verify if the energy outlet is functioning properly and is transmitting electric current. Then turn on washer repair to verify if it is okay or not. The wire along the suitable side of the machine need to be lowered as far as it goes. If this is in a raised position, your machine is off and it will not make any ice.
two. Right freezer temperature
If the icemaker wire is positioned appropriately and is turned on, proceed to verify the freezer temperature. The temperature should really be inside the range of to eight degrees Fahrenheit. If it really is above ten to 12 degrees, your machine will not create ice.
For a newly installed icemaker, you will need up to 24 hours to let the machine function and cool down. A newly installed icemaker might not work till the ice mold temperature has dropped to about 15F – 16F degrees. If you have just added a water line to the refrigerator, it may perhaps take up to about an hour and a half for the machine to begin functioning. Also, a newly installed water line may perhaps have air in the line. It can often take a handful of ice making cycles to clear the line of air.
three. Check water source
Okay, in order to make ice, you need to have water. So make confident that there is water flowing to the ice maker. Verify for kinks in the tubing and appear out for frozen particles stuck within the water tube. Also make certain that the household water supply is turned on. Often the water inlet valve can go bad. If there is water in the ice maker, but it really is not freezing, use a freezer thermometer to confirm that the temperature is cold enough for it to freeze.
4. Check copper provide
Make certain the copper supply line to the refrigerator is turned on beneath the sink, or coming from the basement.
Soon after checking all the above pointed out elements and certain that the freezer is cold sufficient but it is still not producing any ice, verify and really feel the bottom of the ice maker unit. This spot is ordinarily cold for an ice maker running smoothly. But if it is hot or warm, it is achievable that the tiny heating element inside is stuck or broken. This heating element when turned on melts the bottom of the cubes so that they can be released and harvested by the ejector blades. In this case, you will have to replace this portion in order to make your ice maker operate smoothly once again.